Speed Control Parameter
Adjustment Chart
JUMP
Parameter
|
Who
|
When
|
PerfectPass
|
CREW
WEIGHT |
Driver/Judge
|
Before
event |
Weight
in lbs |
SPEED
|
Skier
|
Before
each pass |
Speed
in Kph |
JUMP
LETTER |
Driver/Judge
- initial setting based on speed, weight, rated distance and input from skier
|
Before
each jump |
Select
NEW JUMPER and input speed, skier weight and rated distance. Skier may adjust
initial setting +/- 3 letters. Adjust as necessary |
SKIER
WEIGHT |
Driver/Judge
|
Before
each skier No adjustment between jumps |
Weight
in lbs |
JUMP
DISTANCE |
Driver/Judge
-with skier input on initial letter setting |
Before
each skier Driver may adjust best
jump or letter as necessary between jumps (notify skier of change) to obtain
actual times |
Distance
in feet (system selects initial letter) - Skier may adjust initial setting
+/- 3 letters Adjust letter as necessary |
RPM
ADJUST |
Driver
|
As
needed |
Adjust
for conditions in increments of 10 RPM |
S2%
AND S2FINE |
Driver
|
Before
each skier based on type of second segment pull requested Numbers are a
suggested starting point only and are boat dependent May have to start or
make adjustments outside of suggested values Driver may adjust as necessary
to obtain actual times in second segment |
S2%
(suggested starting point): Fast second segment = Faster 40 to Faster 60
Return to Baseline = Zero (Option 2)
S2 FINE – Fine RPM adjust for second segment – normally only used when
option 2 has been selected |
CT
|
Driver
|
Before
event May be adjusted as necessary to control speed during counter cut w/head
or tail wind |
Recommended:
Normal 190 Head Wind 210 Tail
Wind 170 ¾ Cut 160 |
X8u
|
Skier
|
The
manufacturer’s X8u setting may be adjusted up or down by up to 30% (rounded)
of the manufacturer setting and adjustment zones as published. Any change
from the manufacturer’s setting shall be communicated by the skier before the
first jump. One additional adjustment may be made after the skier’s 1st jump only. |
X8u
(UP) controls the rate of additional rpm added once the jump switch closes.
The higher the number, the lower the rate rpm is added. With a higher number,
it will take longer for the full additional rpm to be reached (softer at the
start/stronger near the ramp). |
X8d
|
Skier
|
Skier can choose at the dock before 1st jump. No further change |
X8d
(DOWN) controls the timing of the rpm drop in the second segment. The higher
the number, the longer it will take for the boat to begin controlling speed. |
SLALOM
Parameter
|
Who
|
When
|
PerfectPass
|
OPERATING
MODE |
Driver/Judge
|
Before
event |
Tournament
|
CREW
WEIGHT |
Driver/Judge
|
Before
event |
Weight
in lbs |
SPEED
|
Skier
|
Before
first pass |
Speed
in Kph |
SKIER
WEIGHT |
Driver/Judge
|
Before
each skier No adjustment between passes |
Weight
in lbs |
KX
|
Skier
– should be set to Normal unless skier asks for other setting |
Before
each skier and ONLY ONE additional adjustment between passes. |
KX
NORMAL = default KX + & KX++ = firmer KX -= softer |
PX
|
Skier
– should be set to zero (switch off) unless skier asks for other setting |
Before
each skier No adjustment between passes |
PX
= 0 to 40 Zero eliminates the switch |
RPM
ADJUST |
Driver
|
Adjust
as necessary for conditions |
Adjust
for conditions in increments of 5 RPM |
SSB
|
Driver
|
Adjust
as necessary to balance speed between first and second segments of the course
|
Initial
setting for each boat from chart
-adjust as needed |
TRICKS
Parameter
|
Who
|
When
|
PerfectPass
|
Speed
|
Skier
|
Before
each pass |
Speed
in Kph |
Kd
|
Skier
– should be set |
Before
each pass |
Normal
= 28 |
|
to
normal unless skier |
|
|
|
asks
for other setting |
|
|